Shower maintenance will keep it running smoothly and rust-free.
Although your shower is intended to keep you clean, the space can rapidly become filthy. Showers accumulate soap scum, mildew, and bacteria if not cleaned correctly and regularly. This is true regardless of whether you have a glass, tile, or stone shower. While daily upkeep can keep your shower pretty clean, it still needs a comprehensive clean now and again to ensure it stays in good condition. Fortunately, cleaning a shower is a simple task that can be accomplished with a few everyday household items.
How Often Should You Clean Your Shower?
Numerous variables, such as the quantity and frequency of use, the hardness of your water, the materials you use, and how well-ventilated your bathroom is, affect how frequently you clean your shower. Because of these variables, there is yet to be a definitive solution. However, most individuals tend to shower twice or four times every month. This advice is for deep cleaning your shower—general care should be done once a week.
Cleaning a Glass Shower
Vinegar is the most incredible cleaning solution for a glass shower since it dissolves soap scum and mineral deposits. Use a spray bottle of diluted white vinegar for minor cleaning in between thorough cleanings. Avoid using abrasive cleaning materials that can scratch the surface of a glass shower.
Materials Required
Before you begin, make sure you have these ingredients on hand.
The spray bottle
White vinegar that has been distilled
A soft sponge or microfiber cloth
Baking powder
Toothbrush
Warm water
Steps
To clean a glass shower, follow these procedures.
Remove from the shower any personal things, shampoo bottles, soap dishes, or other objects.
Fill a spray bottle halfway with distilled white vinegar and half with warm water.
Apply the vinegar solution to all glass surfaces, covering the walls, shower floor, and other locations.
Allow at least 10 to 15 minutes for the vinegar solution to sit.
Using a damp microfiber cloth or soft sponge, sprinkle baking soda over it.
Scrub the glass surfaces gently with a cloth or sponge, paying particular attention to areas with tenacious stains and soap scum accumulation.
Scrub hard-to-reach spots, corners, and edges with an old toothbrush dipped in vinegar.
Rinse the shower with warm water to eliminate vinegar or baking soda residue.
To dry the glass, use a microfiber towel.
Cleaning a Stone Shower
Before cleaning a stone shower, you must first determine the type of stone. Natural stones, such as marble, granite, travertine, and slate, vary in porosity and sensitivity to cleaning agents. Before you begin, determine the type of stone in your shower to ensure you employ the proper cleaning approach. Warm water and a natural, pH-neutral soap are adequate cleaning solutions for most stone varieties.
Materials Required
Before you begin, make sure you have these ingredients on hand.
pH-neutral natural soap
Warm water
The spray bottle
Microfiber cloth or a soft sponge
Brush with a soft bristle (optional for tough stains)
Steps
To clean a stone shower, follow these procedures.
Remove from the shower any personal things, shampoo bottles, soap dishes, or other objects.
Warm water and a few drops of natural pH-neutral soap in a spray bottle
Spray the solution all over the stone surfaces, making sure to get the walls, shower floor, and other places covered.
Allow a few minutes for the cleaning solution to sit.
Wipe the stone surfaces clean with a soft sponge or microfiber cloth.
Scrub any stains with a soft-bristled brush.
Rinse the shower with warm water to eliminate vinegar or baking soda residue.
To dry the glass, use a microfiber towel.
Cleaning a Tile Shower
Cleaning a tile shower is similar to cleaning a glass shower, but you must pay special attention to the grout lines, which can harbor a lot of grime. To protect the grout lines from moisture and discoloration, try using a natural grout sealant.
Materials Required
Before you begin, make sure you have these ingredients on hand.
distilled white vinegar
Baking powder
The spray bottle
Warm water
A soft sponge or microfiber cloth
Toothbrush
Steps
To clean a stone shower, follow these procedures.
Remove from the shower any personal things, shampoo bottles, soap dishes, or other objects.
Fill a spray bottle halfway with distilled white vinegar and half with warm water.
Apply the vinegar solution to all glass surfaces, covering the walls, shower floor, and other locations.
Allow at least 10 to 15 minutes for the vinegar solution to sit.
Using a damp microfiber cloth or soft sponge, sprinkle baking soda over it.
Scrub the glass surfaces gently with a cloth or sponge, paying particular attention to areas with tenacious stains and soap scum accumulation.
In a mixing basin, combine baking soda and water to make a paste.
Spread the paste on the grout lines using an old toothbrush.
Allow the paste to sit for a few minutes before using.
Rinse the shower with warm water to eliminate vinegar or baking soda residue.
To dry the glass, use a microfiber towel.
How to Get Rid of Shower Stains
The above methods should be sufficient to remove stains from soap and limescale. However, rust stains will require a different approach. Metal fixtures, tiles with iron content, or spots where metal objects have left rust marks are familiar places for rust stains.
Materials Required
Before you begin, make sure you have these ingredients on hand.
Lemon juice or white vinegar
Baking powder
The spray bottle
discarded toothbrush
Water that is warm
Steps
To remove rust stains, follow these instructions.
Look for rust spots.
Spray white vinegar or lemon juice straight onto the rust stains, ensuring the afflicted areas are well-saturated.
Allow 15 to 30 minutes for the vinegar or lemon juice to rest on the rust stains.
Scrub the rust stains carefully using a damp cloth or sponge after applying baking soda to the damaged areas.
Scrubs hard-to-reach places, corners, and edges using an old toothbrush.
To remove any residue, thoroughly rinse the shower with warm water. Check to see if the rust stains have been eliminated. If they persist, the procedure may need to be repeated.
How to Clean Your Shower
There are several steps you can take in between deep cleans to keep your shower cleaner for longer.
After showering, use a squeegee to remove water from the tiles and floor. Because there is no remaining moisture or residue inside that moisture, removing moisture ensures that there is no soap scum, hard water buildup, or mildew in the shower.
Make sure your bathroom has adequate airflow. A clean bathroom is dry.
Clean and maintain grout lines regularly to avoid mold and mildew formation.
Abrasive cleansers should be avoided since they can harm the shower surfaces over time. Use moderate, pH-neutral cleaners or natural alternatives instead.
Replace any worn-out shower accessories. Shower accessories like loofahs, bathmats, and curtains can gather filth over time.
Seal stone surfaces and grout at least once a year to keep the color and finish.